As a design and build screw piling specialist - we are acutely aware that the structural engineers have very different interests to the geotechnical engineers…

Why bored piles? Why driven piles? Why shallow pads? Why ground improvement?
Rodney shares his epiphany moment...

This man (some say legend) has undertaken pretty much every role on a screw pile site since as long as he can remember! So he knows…

We achieved an excellent load test result while getting some consulting engineers right up close during the fully sustained static load test…

At Revex, we love to reflect on the year that was and recognise our people for the things they did for our clients, for the company, and for their peers. We love to reward people living our values.

When undertaking deep foundations geotechnical engineers and structural engineers love certainty... And in that regard screw piles are hard to beat when compared to other deep foundations methodologies.

To dodge a bullet is to barely avoid something bad, harmful, or unpleasant.... This certainly applies to boulders and cobbles in the geotechnical report for your new build!

Whenever I see boulders and cobbles it makes me very nervous. There is absolutely no doubt in my mind that any deep foundation system will have it's challenges…

Last week we discussed the design implications behind a tricky site with 120 piles @ 25m long…

Our site team recently mobilized to a tricky site with 120 piles at 25m long taking loads between 200kN and 700kN…

In piling – the closer you get to something – the more likely you will be of damaging it. Whether through vibration, collapsing bores, or…

Screw piles are made of steel, so good quality welds are very important! These connections/splices are...

Screw piles aren't your standard foundation, and their installation is quite different from other piling types...

While the expression may allude to the cat-o'-nine-tails, or “cat,” a whip with nine lashes used to...

We often have a quiz in our presentations where many design consultants are dumbfounded that screw piles can go deeper than 12m...

Certainly not the words you normally associate with piling... Not when you...

There's no need to be afraid when constructing late at night - in fact when you engage professionals, it actually has some benefits.

6 months.... and you've well and truly earned your stripes! Welcome to our REVEX PILING Family, Andrew Uasi.

Installing 8no. piles to 28m depths right beside an operational school is actually easy-peasy!!!

This is some of the advice we could have given a client recently. Not to be misunderstood - the statement was around how and when to pile.